Categories:

TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)

$259.99

Physical & Power Setup

  • Rack-mountable (1U) with included mounting kit.
  • Connect AC power; ensure sufficient ventilation as it may run warm.
  • Use PoE+ ports to power cameras, APs; each can supply up to 30 W, total 150 W.

B. Basic Network Configuration

  • Access via Web GUI or CLI (default IP 192.168.0.1).
  • Use Omada SDN Controller or Omada app for zero-touch provisioning and centralized cloud management.

C. VLAN & Routing

  • Create up to 4K VLANs; supports voice VLAN.
  • Configure up to 32 IPv4/IPv6 static routes for inter-VLAN routing.
  • Use IGMP snooping and MVR for multicast efficiency.

D. QoS & Traffic Control

  • Define CoS/DSCP-based priority with 8 queues.
  • Control bandwidth per port/flow; implement storm control for broadcast/multicast.
  • Prioritize voice/video traffic with SP or WRR modes.

E. Security & Monitoring

  • Enable IP-MAC-Port binding, 802.1X authentication, DHCP snooping, and DoS defense.
  • Use ACLs (up to 230 entries) for access control.
  • Utilize SNMP, RMON and port mirroring for network monitoring.

TP‑Link JetStream TL‑SG2218P is an 18‑port Gigabit smart switch featuring 16 PoE+ ports (150 W total) and 2 SFP slots, delivering reliable power and flexibility for IP‑based devices. It boasts 36 Gbps switching capacity, advanced L2+/L3 features (VLAN, ACL, static routing), 802.1p QoS, and robust security (802.1X, DHCP Snooping). Fully manageable via Omada SDN (cloud, ZTP, mobile app), it’s an ideal rackmount solution for offices, surveillance, VoIP, and campus networks.

Specifications

Feature Details
Ports 16× Gigabit PoE+ (802.3af/at), 2× Gigabit SFP TP-Link+13TP-Link+13Newegg.com+13
PoE Budget Total 150 W, up to 30 W per port
Switching Capacity 36 Gbps; 26.78 Mpps
MAC Table / Buffer 8 K MAC entries; 4.1 Mbit buffer; Jumbo frames up to 9 KB
QoS & Traffic Control 802.1p CoS/DSCP, 8 queues, SP/WRR, bandwidth & storm control
Layer 2+/Layer 3 VLAN, ACL (230 entries), static routing (32 routes IPv4/IPv6), DHCP server/relay, IGMP snooping (511 groups)
Security IP-MAC-Port Binding, 802.1X, Radius, DHCP Snooping, DoS defense, storm control
Management Web GUI, CLI, SNMP v1/2c, RMON, Omada SDN (cloud, ZTP, Omada app)
IPv6 Features Dual-stack, neighbor discovery, MLD snooping
Physical 1U rackmount, metal chassis, fanless design (UK variant)
Power & Heat Input 100–240 VAC; Max consumption ~181 W (with full PoE load); heat dissipation ~619 BTU/hr
Dimensions ~440×180×44 mm (17.3″×7.1″×1.7″)
Be the first to review “TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Be the first to review “TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)”

Recently Viewed

    • Powering the Device: Use micro USB cable with included charger or power bank (5V/2A recommended for stability).
    • Setup Process:
      • Access admin interface through web browser after connection.
      • Guided setup allows switching between multiple modes.
    • Mode Breakdown:
      • Router Mode: Create a private wireless network from a wired source.
      • Access Point Mode: Convert existing wired connection to Wi-Fi.
      • Client Mode: Connect wired-only devices (like printers) to a wireless network.
      • Repeater Mode: Extend existing Wi-Fi signal to hard-to-reach areas.
      • Hotspot Mode: Connect to hotel Wi-Fi and share the connection.
    • File Sharing:
      • Connect USB drive to share media or files across connected devices.
      • Can also charge phones or gadgets via USB 2.0 port.
    • Security & Management:
      • Built-in firewall, IP/MAC filtering, and access controls.
      • WPA/WPA2 encryption for all modes.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AC750 Wireless Wi-Fi Router Portable Travel Size (TL-WR902AC)

     $39.99
    • Powering the Device: Use micro USB cable with included charger or power bank (5V/2A recommended for stability).
    • Setup Process:
      • Access admin interface through web browser after connection.
      • Guided setup allows switching between multiple modes.
    • Mode Breakdown:
      • Router Mode: Create a private wireless network from a wired source.
      • Access Point Mode: Convert existing wired connection to Wi-Fi.
      • Client Mode: Connect wired-only devices (like printers) to a wireless network.
      • Repeater Mode: Extend existing Wi-Fi signal to hard-to-reach areas.
      • Hotspot Mode: Connect to hotel Wi-Fi and share the connection.
    • File Sharing:
      • Connect USB drive to share media or files across connected devices.
      • Can also charge phones or gadgets via USB 2.0 port.
    • Security & Management:
      • Built-in firewall, IP/MAC filtering, and access controls.
      • WPA/WPA2 encryption for all modes.
    • Mount & Power
      • Install using included pole/wall mount.
      • Connect Ethernet via provided passive PoE adapter (24 V DC).
    • Access Interface
      • Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
      • Or use Pharos Control for multi‑device management.
    • Mode Setup
      • Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
      • Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
    • Alignment & Tuning
      • Physically align with another antenna using signal-strength indicators.
      • Set proper ACK timeout/distance for your range.
    • Security & Network
      • Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
      • Enable firewall, MAC/IP binding, bandwidth control if required.
    • Monitoring & Maintenance
      • Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
      • Optionally enable SNMP, DDNS, SSH for deeper control.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)

     $74.99
    • Mount & Power
      • Install using included pole/wall mount.
      • Connect Ethernet via provided passive PoE adapter (24 V DC).
    • Access Interface
      • Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
      • Or use Pharos Control for multi‑device management.
    • Mode Setup
      • Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
      • Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
    • Alignment & Tuning
      • Physically align with another antenna using signal-strength indicators.
      • Set proper ACK timeout/distance for your range.
    • Security & Network
      • Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
      • Enable firewall, MAC/IP binding, bandwidth control if required.
    • Monitoring & Maintenance
      • Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
      • Optionally enable SNMP, DDNS, SSH for deeper control.
    • Mounting & Placement: EAP225-Outdoor is designed for outdoor environments with an IP65-rated enclosure. Use included kits for wall or pole mounting.
    • Powering the Device: Can be powered via standard 802.3af PoE switch or 24V passive PoE injector.
    • Initial Setup Options:
      • Use standalone mode through web interface for basic setup.
      • For advanced features and scalability, adopt into Omada SDN Controller (hardware, software, or cloud).
    • Wi-Fi Configuration:
      • Setup multiple SSIDs with separate VLANs for network segmentation.
      • Enable MU-MIMO and Beamforming for better simultaneous device performance.
      • Configure band steering to optimize dual-band connections.
    • Guest Access:
      • Setup captive portal for guest networks with options for password, voucher, or custom login page.
      • Apply bandwidth limits and access time schedules.
    • Mesh and Roaming:
      • Supports Omada Mesh for wireless uplinks between APs.
      • Seamless roaming enables stable connections as users move between coverage areas.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point (EAP225-Outdoor)

     $69.99
    • Mounting & Placement: EAP225-Outdoor is designed for outdoor environments with an IP65-rated enclosure. Use included kits for wall or pole mounting.
    • Powering the Device: Can be powered via standard 802.3af PoE switch or 24V passive PoE injector.
    • Initial Setup Options:
      • Use standalone mode through web interface for basic setup.
      • For advanced features and scalability, adopt into Omada SDN Controller (hardware, software, or cloud).
    • Wi-Fi Configuration:
      • Setup multiple SSIDs with separate VLANs for network segmentation.
      • Enable MU-MIMO and Beamforming for better simultaneous device performance.
      • Configure band steering to optimize dual-band connections.
    • Guest Access:
      • Setup captive portal for guest networks with options for password, voucher, or custom login page.
      • Apply bandwidth limits and access time schedules.
    • Mesh and Roaming:
      • Supports Omada Mesh for wireless uplinks between APs.
      • Seamless roaming enables stable connections as users move between coverage areas.
    • Physical Setup: Mount it on ceiling or wall using included bracket. Compact and lightweight design for easy indoor deployment.
    • Power Supply: Operates via 802.3af PoE. Compatible with most PoE switches or injectors.
    • Initial Configuration:
      • Can be managed as a standalone access point through the built-in web UI.
      • For larger networks, use the Omada SDN controller (hardware, software, or cloud-based).
    • Wireless Network Setup:
      • Configure dual-band SSIDs (2.4GHz & 5GHz) with individual settings.
      • Set channel width, power limits, and security (WPA3 recommended).
      • Enable OFDMA and MU-MIMO for dense environments like offices, schools, or hotels.
    • Guest Network & VLANs:
      • Create isolated guest SSIDs with captive portal login (SMS, vouchers, password).
      • Tag SSIDs with VLANs for segmented traffic management.
    • Advanced Features:
      • Enable band steering to push clients to 5GHz.
      • Activate seamless roaming, airtime fairness, and client limit controls.
      • Use QoS to prioritize voice/video traffic.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AX1800 Ceiling Mount 2.4 / 5 GHz Wi-Fi 6 Access Point (EAP610_V2)

     $94.99
    • Physical Setup: Mount it on ceiling or wall using included bracket. Compact and lightweight design for easy indoor deployment.
    • Power Supply: Operates via 802.3af PoE. Compatible with most PoE switches or injectors.
    • Initial Configuration:
      • Can be managed as a standalone access point through the built-in web UI.
      • For larger networks, use the Omada SDN controller (hardware, software, or cloud-based).
    • Wireless Network Setup:
      • Configure dual-band SSIDs (2.4GHz & 5GHz) with individual settings.
      • Set channel width, power limits, and security (WPA3 recommended).
      • Enable OFDMA and MU-MIMO for dense environments like offices, schools, or hotels.
    • Guest Network & VLANs:
      • Create isolated guest SSIDs with captive portal login (SMS, vouchers, password).
      • Tag SSIDs with VLANs for segmented traffic management.
    • Advanced Features:
      • Enable band steering to push clients to 5GHz.
      • Activate seamless roaming, airtime fairness, and client limit controls.
      • Use QoS to prioritize voice/video traffic.