Categories:

TP-Link Pharos Outdoor Long Range Wireless 2.4GHz Dual-Polarized Directional MIMO Antenna (CPE210)

$44.99

  • Installation:
    • Mount the CPE210 on a pole or wall using the included hardware.
    • Connect power via the provided 24V passive PoE adapter for long-distance power delivery.
  • Modes Supported:
    • Supports AP, Client, AP Router, Repeater, WISP Client Router modes.
    • Ideal for point-to-point and point-to-multipoint wireless bridges.
  • Antenna & Signal:
    • Built-in high-gain directional antenna designed for long-range transmission.
    • Dual-polarized MIMO improves stability and performance across distances.
  • Configuration Interface:
    • Access via web browser to set SSID, channel, transmit power, security, and more.
    • Use Pharos Control software for centralized management of multiple units.
  • Security Features:
    • Supports WPA/WPA2 encryption, MAC filtering, VLAN, and watchdog rebooting.
    • Network isolation options to protect connected devices.
  • Typical Use Cases:
    • Long-range wireless internet bridging between buildings or towers.
    • Outdoor CCTV network backhaul.
    • Wi-Fi extension to farms, campuses, warehouses, or construction sites.

TP-Link CPE210 is a high-power 2.4GHz outdoor wireless solution with dual-polarized directional MIMO antenna, delivering up to 300Mbps over long distances. With adjustable transmission power, weatherproof design, and multiple operating modes, it’s ideal for point-to-point bridging, outdoor Wi-Fi coverage, and secure remote connectivity.

Specifications

Feature Detail
Wireless Standard IEEE 802.11n/g/b (2.4GHz Single Band)
Operating Frequency 2.4 – 2.483GHz
Maximum Wireless Speed Up to 300 Mbps
Antenna Type 9 dBi 2×2 Dual-Polarized Directional MIMO Antenna
Transmission Power Up to 27 dBm / 500 mW (Adjustable)
Ethernet Port 1 × 10/100 Mbps LAN (Passive PoE In)
Power Supply 24V Passive PoE Adapter (Included)
Mounting Options Pole and Wall Mounting Kits Included
Enclosure Protection Weatherproof Outdoor Casing
Operating Temperature -30°C to +70°C
Humidity Tolerance 10% – 90% Non-Condensing
Management Software Pharos Control Centralized Management
LED Indicators Power, LAN, Signal Strength
Certifications CE, FCC, RoHS
Be the first to review “TP-Link Pharos Outdoor Long Range Wireless 2.4GHz Dual-Polarized Directional MIMO Antenna (CPE210)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Be the first to review “TP-Link Pharos Outdoor Long Range Wireless 2.4GHz Dual-Polarized Directional MIMO Antenna (CPE210)”

Recently Viewed

    • Mounting: Easily mount on ceiling or wall using the included kit. Ideal for indoor enterprise-grade installations.
    • Powering the Device: Powered via 802.3at PoE+ using a compatible PoE switch or injector.
    • Initial Setup:
      • Use Omada SDN Controller for centralized cloud or on-site management.
      • Can also be used in standalone mode via web GUI for quick deployments.
    • Wi-Fi Configuration:
      • Set up dual-band SSIDs with customized security and bandwidth rules.
      • Utilize Wi-Fi 6 features like OFDMA and MU-MIMO to support high client density.
      • Band steering and airtime fairness ensure optimized device performance.
    • Guest Networking & Security:
      • Enable captive portal with flexible authentication (voucher, SMS, password).
      • Use VLAN tagging for traffic segmentation and policy control.
      • Activate WPA3 for enhanced wireless security.
    • Performance Features:
      • Beamforming for stronger connections.
      • Load balancing across multiple APs.
      • Seamless roaming support with fast handoff.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point (EAP660)

     $184.99
    • Mounting: Easily mount on ceiling or wall using the included kit. Ideal for indoor enterprise-grade installations.
    • Powering the Device: Powered via 802.3at PoE+ using a compatible PoE switch or injector.
    • Initial Setup:
      • Use Omada SDN Controller for centralized cloud or on-site management.
      • Can also be used in standalone mode via web GUI for quick deployments.
    • Wi-Fi Configuration:
      • Set up dual-band SSIDs with customized security and bandwidth rules.
      • Utilize Wi-Fi 6 features like OFDMA and MU-MIMO to support high client density.
      • Band steering and airtime fairness ensure optimized device performance.
    • Guest Networking & Security:
      • Enable captive portal with flexible authentication (voucher, SMS, password).
      • Use VLAN tagging for traffic segmentation and policy control.
      • Activate WPA3 for enhanced wireless security.
    • Performance Features:
      • Beamforming for stronger connections.
      • Load balancing across multiple APs.
      • Seamless roaming support with fast handoff.
    • Basic Setup:
      • Plug WAN port into your internet source (DSL/modem).
      • Use browser-based setup wizard for internet and Wi-Fi configuration.
    • Wireless Setup:
      • Customize SSID, password, and security type (WPA2 recommended).
      • Adjust transmit power and channel settings for stability.
    • Access Point Mode:
      • Convert a wired connection into a wireless signal by disabling DHCP.
    • Range Extender Mode:
      • Extend the existing wireless network coverage through WDS bridging.
    • Network Management:
      • Use built-in QoS to prioritize bandwidth for specific devices or services.
      • Create guest networks with isolated access.
      • Parental controls allow time or content-based restrictions.
    • Security Setup:
      • Enable WPA2 security with strong password.
      • Configure MAC filtering or IP-based access control for extra protection.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link 300Mbps Wireless N Router (TL-WR841NV14)

     $19.99
    • Basic Setup:
      • Plug WAN port into your internet source (DSL/modem).
      • Use browser-based setup wizard for internet and Wi-Fi configuration.
    • Wireless Setup:
      • Customize SSID, password, and security type (WPA2 recommended).
      • Adjust transmit power and channel settings for stability.
    • Access Point Mode:
      • Convert a wired connection into a wireless signal by disabling DHCP.
    • Range Extender Mode:
      • Extend the existing wireless network coverage through WDS bridging.
    • Network Management:
      • Use built-in QoS to prioritize bandwidth for specific devices or services.
      • Create guest networks with isolated access.
      • Parental controls allow time or content-based restrictions.
    • Security Setup:
      • Enable WPA2 security with strong password.
      • Configure MAC filtering or IP-based access control for extra protection.

  • Physical & Power Setup

    • Rack-mountable (1U) with included mounting kit.
    • Connect AC power; ensure sufficient ventilation as it may run warm.
    • Use PoE+ ports to power cameras, APs; each can supply up to 30 W, total 150 W.

    B. Basic Network Configuration

    • Access via Web GUI or CLI (default IP 192.168.0.1).
    • Use Omada SDN Controller or Omada app for zero-touch provisioning and centralized cloud management.

    C. VLAN & Routing

    • Create up to 4K VLANs; supports voice VLAN.
    • Configure up to 32 IPv4/IPv6 static routes for inter-VLAN routing.
    • Use IGMP snooping and MVR for multicast efficiency.

    D. QoS & Traffic Control

    • Define CoS/DSCP-based priority with 8 queues.
    • Control bandwidth per port/flow; implement storm control for broadcast/multicast.
    • Prioritize voice/video traffic with SP or WRR modes.

    E. Security & Monitoring

    • Enable IP-MAC-Port binding, 802.1X authentication, DHCP snooping, and DoS defense.
    • Use ACLs (up to 230 entries) for access control.
    • Utilize SNMP, RMON and port mirroring for network monitoring.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)

     $259.99

    Physical & Power Setup

    • Rack-mountable (1U) with included mounting kit.
    • Connect AC power; ensure sufficient ventilation as it may run warm.
    • Use PoE+ ports to power cameras, APs; each can supply up to 30 W, total 150 W.

    B. Basic Network Configuration

    • Access via Web GUI or CLI (default IP 192.168.0.1).
    • Use Omada SDN Controller or Omada app for zero-touch provisioning and centralized cloud management.

    C. VLAN & Routing

    • Create up to 4K VLANs; supports voice VLAN.
    • Configure up to 32 IPv4/IPv6 static routes for inter-VLAN routing.
    • Use IGMP snooping and MVR for multicast efficiency.

    D. QoS & Traffic Control

    • Define CoS/DSCP-based priority with 8 queues.
    • Control bandwidth per port/flow; implement storm control for broadcast/multicast.
    • Prioritize voice/video traffic with SP or WRR modes.

    E. Security & Monitoring

    • Enable IP-MAC-Port binding, 802.1X authentication, DHCP snooping, and DoS defense.
    • Use ACLs (up to 230 entries) for access control.
    • Utilize SNMP, RMON and port mirroring for network monitoring.
    • Plug & Play Setup: Connect one adapter to your router via Ethernet and plug into a wall outlet; plug the second adapter elsewhere, pair via button, and connect your device—no configuration required.
    • Power Passthrough: Integrated outlet lets you still use the socket for other devices.
    • Secure Pairing: Press “Pair” on both adapters to establish encrypted connection using 128-bit AES.
    • Power Saving: Automatically reduces power when idle—saves energy and reduces heat.
    • Compatibility & Range: Compatible with all HomePlug AV/AV2 adapters and works up to 300 m over the electrical wiring network.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AV1000 Gigabit Passthrough Powerline Starter Kit (TL-PA7017P KIT)

     $59.99
    • Plug & Play Setup: Connect one adapter to your router via Ethernet and plug into a wall outlet; plug the second adapter elsewhere, pair via button, and connect your device—no configuration required.
    • Power Passthrough: Integrated outlet lets you still use the socket for other devices.
    • Secure Pairing: Press “Pair” on both adapters to establish encrypted connection using 128-bit AES.
    • Power Saving: Automatically reduces power when idle—saves energy and reduces heat.
    • Compatibility & Range: Compatible with all HomePlug AV/AV2 adapters and works up to 300 m over the electrical wiring network.