Categories:

TP-Link AV1000 Gigabit Passthrough Powerline Starter Kit (TL-PA7017P KIT)

$59.99

  • Plug & Play Setup: Connect one adapter to your router via Ethernet and plug into a wall outlet; plug the second adapter elsewhere, pair via button, and connect your device—no configuration required.
  • Power Passthrough: Integrated outlet lets you still use the socket for other devices.
  • Secure Pairing: Press “Pair” on both adapters to establish encrypted connection using 128-bit AES.
  • Power Saving: Automatically reduces power when idle—saves energy and reduces heat.
  • Compatibility & Range: Compatible with all HomePlug AV/AV2 adapters and works up to 300 m over the electrical wiring network.

TP‑Link TL‑PA7017P KIT is an AV1000 Gigabit Powerline Starter Kit featuring integrated power passthrough and high-speed HomePlug AV2 technology. Delivers up to 1000 Mbps over existing electrical wiring, with AES encryption, 300 m range, and energy-saving mode—ideal for lag-free gaming, HD streaming, and stable Internet in hard-to-reach areas, all with a simple plug-and-play setup.

Specifications

Feature Detail
Powerline Standard HomePlug AV2 (also backward compatible with AV/IEEE 1901) TP-Link+13TP-Link+13Nelly’s Security+13
Top Data Rate Up to 1000 Mbps
Ethernet Interface 1× Gigabit RJ‑45 Port per unit
Passthrough Power Outlet Integrated AC socket to avoid blocking outlet
Range Over Electrical Wiring Up to 300 m (≈1000 ft)
Power-Saving Mode Reduces power consumption by up to 85%
AES Encryption 128-bit secure
Buttons Pair/reset function
LED Indicators Power, Powerline link, and Ethernet status
Power Consumption Max ~2.7 W; Typical ~2.3 W; Standby ~0.5–0.8 W
Dimensions (per unit) Approx. 95 × 58 × 42 mm
Certifications FCC, CE, RoHS, UL
Kit Contents 2× TL‑PA7017P adapters, 2× Ethernet cables, Quick install guide
Be the first to review “TP-Link AV1000 Gigabit Passthrough Powerline Starter Kit (TL-PA7017P KIT)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Be the first to review “TP-Link AV1000 Gigabit Passthrough Powerline Starter Kit (TL-PA7017P KIT)”

Recently Viewed

    • Plug In & Power Up
      • Insert RE105 into a standard wall outlet. It draws only ~3.6 W.
      • Keep it within good signal range of your router for best performance.
    • Choose Setup Method
      • WPS Pairing: Press the WPS button on your router, then press the extender’s Range Extender button to pair. LEDs guide optimum placement.
      • AP Mode (optional): Connect a wired device (e.g. TV, console) via Ethernet port to create a new Wi‑Fi network.
    • Placement Guidance
      • Use the built-in intelligent signal LED to find the optimal spot—neither too far from router nor too close.
    • Management
      • Use the TP‑Link Tether mobile app or web-based interface to configure settings, check signal, perform firmware updates, manage MAC filters, and enable domain login if supported.
    • Operational Modes
      • Range Extender Mode: Boosts your router’s Wi‑Fi to extend coverage.
      • Access Point Mode: Converts wired Ethernet to Wi‑Fi hotspot (only 2.4 GHz).
    • Security & Control
      • Enable 64/128/152‑bit WEP or WPA‑PSK/WPA2‑PSK for encryption.
      • Adjust transmit power level if needed for stability or interference concerns.
      • Optionally set MAC address filtering or schedule on/off cycles for power savings.

    Quick View

    Wishlist

    Compare

    Add to cart

    Custom Inquiry
    • Plug In & Power Up
      • Insert RE105 into a standard wall outlet. It draws only ~3.6 W.
      • Keep it within good signal range of your router for best performance.
    • Choose Setup Method
      • WPS Pairing: Press the WPS button on your router, then press the extender’s Range Extender button to pair. LEDs guide optimum placement.
      • AP Mode (optional): Connect a wired device (e.g. TV, console) via Ethernet port to create a new Wi‑Fi network.
    • Placement Guidance
      • Use the built-in intelligent signal LED to find the optimal spot—neither too far from router nor too close.
    • Management
      • Use the TP‑Link Tether mobile app or web-based interface to configure settings, check signal, perform firmware updates, manage MAC filters, and enable domain login if supported.
    • Operational Modes
      • Range Extender Mode: Boosts your router’s Wi‑Fi to extend coverage.
      • Access Point Mode: Converts wired Ethernet to Wi‑Fi hotspot (only 2.4 GHz).
    • Security & Control
      • Enable 64/128/152‑bit WEP or WPA‑PSK/WPA2‑PSK for encryption.
      • Adjust transmit power level if needed for stability or interference concerns.
      • Optionally set MAC address filtering or schedule on/off cycles for power savings.
    • Mount & Power
      • Install using included pole/wall mount.
      • Connect Ethernet via provided passive PoE adapter (24 V DC).
    • Access Interface
      • Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
      • Or use Pharos Control for multi‑device management.
    • Mode Setup
      • Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
      • Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
    • Alignment & Tuning
      • Physically align with another antenna using signal-strength indicators.
      • Set proper ACK timeout/distance for your range.
    • Security & Network
      • Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
      • Enable firewall, MAC/IP binding, bandwidth control if required.
    • Monitoring & Maintenance
      • Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
      • Optionally enable SNMP, DDNS, SSH for deeper control.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)

     $74.99
    • Mount & Power
      • Install using included pole/wall mount.
      • Connect Ethernet via provided passive PoE adapter (24 V DC).
    • Access Interface
      • Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
      • Or use Pharos Control for multi‑device management.
    • Mode Setup
      • Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
      • Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
    • Alignment & Tuning
      • Physically align with another antenna using signal-strength indicators.
      • Set proper ACK timeout/distance for your range.
    • Security & Network
      • Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
      • Enable firewall, MAC/IP binding, bandwidth control if required.
    • Monitoring & Maintenance
      • Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
      • Optionally enable SNMP, DDNS, SSH for deeper control.
    • Installation: Simply plug into a power socket and connect via WPS button or through the TP-Link mobile app.
    • Range Extender Mode: Increases existing Wi-Fi coverage to eliminate dead zones, especially in bedrooms, basements, or upper floors.
    • Access Point Mode: Convert a wired Ethernet connection into a wireless signal using the built-in Ethernet port.
    • Signal Strength LEDs: Help find the best placement location for maximum coverage.
    • Wired Device Support: Ethernet port allows connection of wired devices like smart TVs, PCs, or gaming consoles.
    • Security: Supports WPA/WPA2 encryption to keep your network secure.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link 300Mbps Wi-Fi Range Extender (RE105)

     $19.99
    • Installation: Simply plug into a power socket and connect via WPS button or through the TP-Link mobile app.
    • Range Extender Mode: Increases existing Wi-Fi coverage to eliminate dead zones, especially in bedrooms, basements, or upper floors.
    • Access Point Mode: Convert a wired Ethernet connection into a wireless signal using the built-in Ethernet port.
    • Signal Strength LEDs: Help find the best placement location for maximum coverage.
    • Wired Device Support: Ethernet port allows connection of wired devices like smart TVs, PCs, or gaming consoles.
    • Security: Supports WPA/WPA2 encryption to keep your network secure.
    • Wireless Performance:
      • Supports 5GHz 802.11a/n
      • Delivers speeds up to 300Mbps with 2×2 MIMO technology
    • Antenna & Range:
      • 13dBi built-in directional dual-polarized antenna
      • Optimized for long-distance point-to-point or point-to-multipoint setups
    • Power & Installation:
      • Powered via Passive PoE (24V adapter included)
      • Easy mounting with included pole and wall brackets
    • Reliability & Durability:
      • IPX5-rated enclosure for harsh outdoor environments
      • Advanced ESD and lightning protection built-in
    • Software Management:
      • Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
    • Use Cases:
      • Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link Pharos Outdoor Long Range Wireless 5GHz Dual-Polarized Directional MIMO Antenna (CPE510)

     $54.99
    • Wireless Performance:
      • Supports 5GHz 802.11a/n
      • Delivers speeds up to 300Mbps with 2×2 MIMO technology
    • Antenna & Range:
      • 13dBi built-in directional dual-polarized antenna
      • Optimized for long-distance point-to-point or point-to-multipoint setups
    • Power & Installation:
      • Powered via Passive PoE (24V adapter included)
      • Easy mounting with included pole and wall brackets
    • Reliability & Durability:
      • IPX5-rated enclosure for harsh outdoor environments
      • Advanced ESD and lightning protection built-in
    • Software Management:
      • Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
    • Use Cases:
      • Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties