TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point (EAP225)

$59.99

Physical Installation: Mount on ceiling or wall using included kit. Designed for discreet indoor deployment.
Power Options: Use with 802.3af/at PoE switch or the included 24V passive PoE adapter.
Setup Methods:
- Standalone via web GUI.
- Centralized control using Omada SDN Controller (software, hardware, or cloud-based).
Wireless Settings:
- Configure SSIDs per band.
- Enable MU-MIMO, Band Steering, and Airtime Fairness.
- Set channel width and transmit power manually or auto.
Security Settings:
- Enable WPA/WPA2 encryption.
- Create guest networks using captive portal with SMS, voucher, or password authentication.
- Assign VLANs per SSID for network segmentation.
Advanced Features:
- Seamless roaming between access points.
- Scheduled reboots, client limit per SSID, and SSID hiding.

TP-Link EAP225 is a ceiling-mount wireless access point offering dual-band AC1350 speeds with MU-MIMO and beamforming technology. Designed for high-density environments, it supports PoE, seamless roaming, captive portal guest access, and centralized Omada SDN management—perfect for offices, schools, hotels, and business networks.

Description
Review

Specifications Table

Feature	Detail
Wireless Standards	IEEE 802.11ac/n/g/b/a (Dual Band MU-MIMO)
Maximum Speed	450 Mbps @ 2.4GHz + 867 Mbps @ 5GHz (Total: 1350 Mbps)
Ethernet Port	1× Gigabit RJ-45 (Supports PoE 802.3af/at and 24V Passive PoE)
Antennas	3 Internal (2.4GHz), 2 Internal (5GHz), Omni-directional
Mounting Options	Ceiling or Wall Mount (Kit Included)
Power Consumption	Approx. 10.5–12.6 Watts
Device Capacity	Supports 220+ Concurrent Clients
SSID Support	Up to 16 SSIDs (8 per Band)
Wireless Features	MU-MIMO, Beamforming, Band Steering, Airtime Fairness, Load Balancing
Security Options	WPA/WPA2, VLAN, Captive Portal, Access Control
Management Methods	Omada SDN Controller, Web GUI, CLI, SNMP, Telnet, Mobile App
Operating Temperature	0°C to 40°C
Humidity Tolerance	10% to 90% (Non-Condensing)
Dimensions	205 × 181 × 37 mm
Certifications	CE, FCC, RoHS

Be the first to review “TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point (EAP225)”

There are no reviews yet.

Be the first to review “TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point (EAP225)”

TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)

$259.99

Physical & Power Setup

Rack-mountable (1U) with included mounting kit.
Connect AC power; ensure sufficient ventilation as it may run warm.
Use PoE+ ports to power cameras, APs; each can supply up to 30 W, total 150 W.

B. Basic Network Configuration

Access via Web GUI or CLI (default IP 192.168.0.1).
Use Omada SDN Controller or Omada app for zero-touch provisioning and centralized cloud management.

C. VLAN & Routing

Create up to 4K VLANs; supports voice VLAN.
Configure up to 32 IPv4/IPv6 static routes for inter-VLAN routing.
Use IGMP snooping and MVR for multicast efficiency.

D. QoS & Traffic Control

Define CoS/DSCP-based priority with 8 queues.
Control bandwidth per port/flow; implement storm control for broadcast/multicast.
Prioritize voice/video traffic with SP or WRR modes.

E. Security & Monitoring

Enable IP-MAC-Port binding, 802.1X authentication, DHCP snooping, and DoS defense.
Use ACLs (up to 230 entries) for access control.
Utilize SNMP, RMON and port mirroring for network monitoring.

Plug In & Power Up
- Insert RE105 into a standard wall outlet. It draws only ~3.6 W.
- Keep it within good signal range of your router for best performance.
Choose Setup Method
- WPS Pairing: Press the WPS button on your router, then press the extender’s Range Extender button to pair. LEDs guide optimum placement.
- AP Mode (optional): Connect a wired device (e.g. TV, console) via Ethernet port to create a new Wi‑Fi network.
Placement Guidance
- Use the built-in intelligent signal LED to find the optimal spot—neither too far from router nor too close.
Management
- Use the TP‑Link Tether mobile app or web-based interface to configure settings, check signal, perform firmware updates, manage MAC filters, and enable domain login if supported.
Operational Modes
- Range Extender Mode: Boosts your router’s Wi‑Fi to extend coverage.
- Access Point Mode: Converts wired Ethernet to Wi‑Fi hotspot (only 2.4 GHz).
Security & Control
- Enable 64/128/152‑bit WEP or WPA‑PSK/WPA2‑PSK for encryption.
- Adjust transmit power level if needed for stability or interference concerns.
- Optionally set MAC address filtering or schedule on/off cycles for power savings.

Add to cart

Routers AND extenders

Custom Inquiry

Plug In & Power Up
- Insert RE105 into a standard wall outlet. It draws only ~3.6 W.
- Keep it within good signal range of your router for best performance.
Choose Setup Method
- WPS Pairing: Press the WPS button on your router, then press the extender’s Range Extender button to pair. LEDs guide optimum placement.
- AP Mode (optional): Connect a wired device (e.g. TV, console) via Ethernet port to create a new Wi‑Fi network.
Placement Guidance
- Use the built-in intelligent signal LED to find the optimal spot—neither too far from router nor too close.
Management
- Use the TP‑Link Tether mobile app or web-based interface to configure settings, check signal, perform firmware updates, manage MAC filters, and enable domain login if supported.
Operational Modes
- Range Extender Mode: Boosts your router’s Wi‑Fi to extend coverage.
- Access Point Mode: Converts wired Ethernet to Wi‑Fi hotspot (only 2.4 GHz).
Security & Control
- Enable 64/128/152‑bit WEP or WPA‑PSK/WPA2‑PSK for encryption.
- Adjust transmit power level if needed for stability or interference concerns.
- Optionally set MAC address filtering or schedule on/off cycles for power savings.

Wireless Performance:
- Supports 5GHz 802.11a/n
- Delivers speeds up to 300Mbps with 2×2 MIMO technology
Antenna & Range:
- 13dBi built-in directional dual-polarized antenna
- Optimized for long-distance point-to-point or point-to-multipoint setups
Power & Installation:
- Powered via Passive PoE (24V adapter included)
- Easy mounting with included pole and wall brackets
Reliability & Durability:
- IPX5-rated enclosure for harsh outdoor environments
- Advanced ESD and lightning protection built-in
Software Management:
- Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
Use Cases:
- Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties

Add to cart

Routers AND extenders

TP-Link Pharos Outdoor Long Range Wireless 5GHz Dual-Polarized Directional MIMO Antenna (CPE510)

$54.99

Wireless Performance:
- Supports 5GHz 802.11a/n
- Delivers speeds up to 300Mbps with 2×2 MIMO technology
Antenna & Range:
- 13dBi built-in directional dual-polarized antenna
- Optimized for long-distance point-to-point or point-to-multipoint setups
Power & Installation:
- Powered via Passive PoE (24V adapter included)
- Easy mounting with included pole and wall brackets
Reliability & Durability:
- IPX5-rated enclosure for harsh outdoor environments
- Advanced ESD and lightning protection built-in
Software Management:
- Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
Use Cases:
- Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties

Mount & Power
- Install using included pole/wall mount.
- Connect Ethernet via provided passive PoE adapter (24 V DC).
Access Interface
- Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
- Or use Pharos Control for multi‑device management.
Mode Setup
- Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
- Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
Alignment & Tuning
- Physically align with another antenna using signal-strength indicators.
- Set proper ACK timeout/distance for your range.
Security & Network
- Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
- Enable firewall, MAC/IP binding, bandwidth control if required.
Monitoring & Maintenance
- Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
- Optionally enable SNMP, DDNS, SSH for deeper control.

Add to cart

Routers AND extenders

TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)

$74.99

Mount & Power
- Install using included pole/wall mount.
- Connect Ethernet via provided passive PoE adapter (24 V DC).
Access Interface
- Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
- Or use Pharos Control for multi‑device management.
Mode Setup
- Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
- Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
Alignment & Tuning
- Physically align with another antenna using signal-strength indicators.
- Set proper ACK timeout/distance for your range.
Security & Network
- Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
- Enable firewall, MAC/IP binding, bandwidth control if required.
Monitoring & Maintenance
- Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
- Optionally enable SNMP, DDNS, SSH for deeper control.

Your cart is curently empty

Let up help you find the perfect item

Your cart is curently empty

Let up help you find the perfect item

TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point (EAP225)