Categories:

TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)

$259.99

Physical & Power Setup

  • Rack-mountable (1U) with included mounting kit.
  • Connect AC power; ensure sufficient ventilation as it may run warm.
  • Use PoE+ ports to power cameras, APs; each can supply up to 30 W, total 150 W.

B. Basic Network Configuration

  • Access via Web GUI or CLI (default IP 192.168.0.1).
  • Use Omada SDN Controller or Omada app for zero-touch provisioning and centralized cloud management.

C. VLAN & Routing

  • Create up to 4K VLANs; supports voice VLAN.
  • Configure up to 32 IPv4/IPv6 static routes for inter-VLAN routing.
  • Use IGMP snooping and MVR for multicast efficiency.

D. QoS & Traffic Control

  • Define CoS/DSCP-based priority with 8 queues.
  • Control bandwidth per port/flow; implement storm control for broadcast/multicast.
  • Prioritize voice/video traffic with SP or WRR modes.

E. Security & Monitoring

  • Enable IP-MAC-Port binding, 802.1X authentication, DHCP snooping, and DoS defense.
  • Use ACLs (up to 230 entries) for access control.
  • Utilize SNMP, RMON and port mirroring for network monitoring.

TP‑Link JetStream TL‑SG2218P is an 18‑port Gigabit smart switch featuring 16 PoE+ ports (150 W total) and 2 SFP slots, delivering reliable power and flexibility for IP‑based devices. It boasts 36 Gbps switching capacity, advanced L2+/L3 features (VLAN, ACL, static routing), 802.1p QoS, and robust security (802.1X, DHCP Snooping). Fully manageable via Omada SDN (cloud, ZTP, mobile app), it’s an ideal rackmount solution for offices, surveillance, VoIP, and campus networks.

Specifications

Feature Details
Ports 16× Gigabit PoE+ (802.3af/at), 2× Gigabit SFP TP-Link+13TP-Link+13Newegg.com+13
PoE Budget Total 150 W, up to 30 W per port
Switching Capacity 36 Gbps; 26.78 Mpps
MAC Table / Buffer 8 K MAC entries; 4.1 Mbit buffer; Jumbo frames up to 9 KB
QoS & Traffic Control 802.1p CoS/DSCP, 8 queues, SP/WRR, bandwidth & storm control
Layer 2+/Layer 3 VLAN, ACL (230 entries), static routing (32 routes IPv4/IPv6), DHCP server/relay, IGMP snooping (511 groups)
Security IP-MAC-Port Binding, 802.1X, Radius, DHCP Snooping, DoS defense, storm control
Management Web GUI, CLI, SNMP v1/2c, RMON, Omada SDN (cloud, ZTP, Omada app)
IPv6 Features Dual-stack, neighbor discovery, MLD snooping
Physical 1U rackmount, metal chassis, fanless design (UK variant)
Power & Heat Input 100–240 VAC; Max consumption ~181 W (with full PoE load); heat dissipation ~619 BTU/hr
Dimensions ~440×180×44 mm (17.3″×7.1″×1.7″)
Be the first to review “TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Be the first to review “TP-Link JetStream 18-Port Gigabit Smart Switch with 16-Port PoE+ and 2 SFP Ports (TL-SG2218P)”

Recently Viewed

    • Wireless Performance:
      • Supports 5GHz 802.11a/n
      • Delivers speeds up to 300Mbps with 2×2 MIMO technology
    • Antenna & Range:
      • 13dBi built-in directional dual-polarized antenna
      • Optimized for long-distance point-to-point or point-to-multipoint setups
    • Power & Installation:
      • Powered via Passive PoE (24V adapter included)
      • Easy mounting with included pole and wall brackets
    • Reliability & Durability:
      • IPX5-rated enclosure for harsh outdoor environments
      • Advanced ESD and lightning protection built-in
    • Software Management:
      • Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
    • Use Cases:
      • Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link Pharos Outdoor Long Range Wireless 5GHz Dual-Polarized Directional MIMO Antenna (CPE510)

     $54.99
    • Wireless Performance:
      • Supports 5GHz 802.11a/n
      • Delivers speeds up to 300Mbps with 2×2 MIMO technology
    • Antenna & Range:
      • 13dBi built-in directional dual-polarized antenna
      • Optimized for long-distance point-to-point or point-to-multipoint setups
    • Power & Installation:
      • Powered via Passive PoE (24V adapter included)
      • Easy mounting with included pole and wall brackets
    • Reliability & Durability:
      • IPX5-rated enclosure for harsh outdoor environments
      • Advanced ESD and lightning protection built-in
    • Software Management:
      • Managed via TP-Link’s Pharos Control for network monitoring, upgrades, and settings
    • Use Cases:
      • Ideal for CCTV backhaul, remote internet access, and wireless bridging across large properties
    • Basic Setup:
      • Plug WAN port into your internet source (DSL/modem).
      • Use browser-based setup wizard for internet and Wi-Fi configuration.
    • Wireless Setup:
      • Customize SSID, password, and security type (WPA2 recommended).
      • Adjust transmit power and channel settings for stability.
    • Access Point Mode:
      • Convert a wired connection into a wireless signal by disabling DHCP.
    • Range Extender Mode:
      • Extend the existing wireless network coverage through WDS bridging.
    • Network Management:
      • Use built-in QoS to prioritize bandwidth for specific devices or services.
      • Create guest networks with isolated access.
      • Parental controls allow time or content-based restrictions.
    • Security Setup:
      • Enable WPA2 security with strong password.
      • Configure MAC filtering or IP-based access control for extra protection.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link 300Mbps Wireless N Router (TL-WR841NV14)

     $19.99
    • Basic Setup:
      • Plug WAN port into your internet source (DSL/modem).
      • Use browser-based setup wizard for internet and Wi-Fi configuration.
    • Wireless Setup:
      • Customize SSID, password, and security type (WPA2 recommended).
      • Adjust transmit power and channel settings for stability.
    • Access Point Mode:
      • Convert a wired connection into a wireless signal by disabling DHCP.
    • Range Extender Mode:
      • Extend the existing wireless network coverage through WDS bridging.
    • Network Management:
      • Use built-in QoS to prioritize bandwidth for specific devices or services.
      • Create guest networks with isolated access.
      • Parental controls allow time or content-based restrictions.
    • Security Setup:
      • Enable WPA2 security with strong password.
      • Configure MAC filtering or IP-based access control for extra protection.
      • Power On
        • Connect the devices to power using the provided PoE adapters.
        • You can also use 802.3af PoE if supported by your switch (version dependent).
      • Auto-Pairing
        • The two units are pre-configured and will automatically pair with each other when powered on.
        • LEDs on both units help with signal alignment.
      • Mounting and Alignment
        • Use the included mounting kits to install the devices on a wall or pole.
        • Adjust direction for best signal strength using LED indicators.
      • Connection to Network
        • Connect one unit to your main router/network.
        • Connect the second unit to the remote device or switch (e.g., IP camera, remote building).
      • Optional Management
        • You can manage them using the Omada app, web browser, or a centralized Omada Controller.
        • Advanced features such as VLANs, SSIDs, and captive portals can be configured.

    Quick View

    Wishlist

    Compare

    Add to cart

    Omada Wireless Bridge Pair (Pre-Configured) 5 GHz 867 Mbps Indoor/Outdoor Access Points (EAP211-Bridge Kit)

     $139.99
      • Power On
        • Connect the devices to power using the provided PoE adapters.
        • You can also use 802.3af PoE if supported by your switch (version dependent).
      • Auto-Pairing
        • The two units are pre-configured and will automatically pair with each other when powered on.
        • LEDs on both units help with signal alignment.
      • Mounting and Alignment
        • Use the included mounting kits to install the devices on a wall or pole.
        • Adjust direction for best signal strength using LED indicators.
      • Connection to Network
        • Connect one unit to your main router/network.
        • Connect the second unit to the remote device or switch (e.g., IP camera, remote building).
      • Optional Management
        • You can manage them using the Omada app, web browser, or a centralized Omada Controller.
        • Advanced features such as VLANs, SSIDs, and captive portals can be configured.
    • Installation: Simply plug into a power socket and connect via WPS button or through the TP-Link mobile app.
    • Range Extender Mode: Increases existing Wi-Fi coverage to eliminate dead zones, especially in bedrooms, basements, or upper floors.
    • Access Point Mode: Convert a wired Ethernet connection into a wireless signal using the built-in Ethernet port.
    • Signal Strength LEDs: Help find the best placement location for maximum coverage.
    • Wired Device Support: Ethernet port allows connection of wired devices like smart TVs, PCs, or gaming consoles.
    • Security: Supports WPA/WPA2 encryption to keep your network secure.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link 300Mbps Wi-Fi Range Extender (RE105)

     $19.99
    • Installation: Simply plug into a power socket and connect via WPS button or through the TP-Link mobile app.
    • Range Extender Mode: Increases existing Wi-Fi coverage to eliminate dead zones, especially in bedrooms, basements, or upper floors.
    • Access Point Mode: Convert a wired Ethernet connection into a wireless signal using the built-in Ethernet port.
    • Signal Strength LEDs: Help find the best placement location for maximum coverage.
    • Wired Device Support: Ethernet port allows connection of wired devices like smart TVs, PCs, or gaming consoles.
    • Security: Supports WPA/WPA2 encryption to keep your network secure.