Categories:

TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)

$74.99

  • Mount & Power
    • Install using included pole/wall mount.
    • Connect Ethernet via provided passive PoE adapter (24 V DC).
  • Access Interface
    • Log into the PharOS web GUI (HTTP/HTTPS) on default IP.
    • Or use Pharos Control for multi‑device management.
  • Mode Setup
    • Choose Point‑to‑Point (PtP), Client, AP‑Client Router (WISP), or AP mode.
    • Adjust channel width (20/40/80 MHz), transmit power, and DFS as needed.
  • Alignment & Tuning
    • Physically align with another antenna using signal-strength indicators.
    • Set proper ACK timeout/distance for your range.
  • Security & Network
    • Set WPA2‑PSK or WPA encryption, configure SSIDs and VLAN tagging (in AP mode).
    • Enable firewall, MAC/IP binding, bandwidth control if required.
  • Monitoring & Maintenance
    • Use tools like spectrum analyzer, speed test, and logs via web or Pharos.
    • Optionally enable SNMP, DDNS, SSH for deeper control.

The TP‑Link CPE710 is a rugged, high-gain 5 GHz outdoor CPE designed for long-range wireless links. With a powerful 23 dBi directional antenna and speeds up to 867 Mbps, it’s built for bridging networks between distant buildings (hundreds of meters to kilometers) over clear lines of sight. Its robust IP65 housing, 6 kV lightning and ESD protection, and wide temperature range make it ideal for harsh outdoor environments. Management is flexible through the intuitive PharOS UI or centralized Pharos Control. Applications include point-to-point networking, rural internet delivery, and IP camera connectivity.

Specification Table – TP‑Link CPE710

Feature Details
Wireless Standard IEEE 802.11a/n/ac (5 GHz only)
Max Wireless Speed Up to 867 Mbps (80 MHz channel) Comx Computers+15TP-Link+15Reddit+15
Frequency Range 5.15–5.85 GHz
Antenna Integrated directional 2×2 MIMO, 23 dBi gain
Beamwidth ~9° horizontal × 7° vertical
Ethernet Port Single Gigabit RJ‑45 with PoE input/output
Power Supply 16–27 V DC passive PoE (includes 24 V PoE adapter)
Transmit Power Up to +27 dBm, adjustable by 1 dBm
Processor & Memory Qualcomm 750 MHz CPU, 128 MB RAM, 16 MB Flash
Lightning/ESD Protection 6 kV lightning, 15 kV ESD
Weatherproofing IP65 rating, -40 °C to +70 °C
Enclosure Dimensions 366 × 280 × 207 mm (14.4″×11″×8.1″)
Management PharOS web GUI, Pharos Control (centralized), SNMP, SSH
Network Features Static/DHCP/PPPoE, firewall, ALG/UPnP, VLAN, WDS
Wireless Features 20/40/80 MHz, DFS, WDS, MAC filter, ACK timeout, spectrum analyzer, etc.
Be the first to review “TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Be the first to review “TP-Link Outdoor Long Range Wireless High-Gain Directional 2X2 MIMO Antenna with Dish for Long Distance Application (CPE710)”

Recently Viewed

    • Physical Installation: Mount on ceiling or wall using included kit. Designed for discreet indoor deployment.
    • Power Options: Use with 802.3af/at PoE switch or the included 24V passive PoE adapter.
    • Setup Methods:
      • Standalone via web GUI.
      • Centralized control using Omada SDN Controller (software, hardware, or cloud-based).
    • Wireless Settings:
      • Configure SSIDs per band.
      • Enable MU-MIMO, Band Steering, and Airtime Fairness.
      • Set channel width and transmit power manually or auto.
    • Security Settings:
      • Enable WPA/WPA2 encryption.
      • Create guest networks using captive portal with SMS, voucher, or password authentication.
      • Assign VLANs per SSID for network segmentation.
    • Advanced Features:
      • Seamless roaming between access points.
      • Scheduled reboots, client limit per SSID, and SSID hiding.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point (EAP225)

     $59.99
    • Physical Installation: Mount on ceiling or wall using included kit. Designed for discreet indoor deployment.
    • Power Options: Use with 802.3af/at PoE switch or the included 24V passive PoE adapter.
    • Setup Methods:
      • Standalone via web GUI.
      • Centralized control using Omada SDN Controller (software, hardware, or cloud-based).
    • Wireless Settings:
      • Configure SSIDs per band.
      • Enable MU-MIMO, Band Steering, and Airtime Fairness.
      • Set channel width and transmit power manually or auto.
    • Security Settings:
      • Enable WPA/WPA2 encryption.
      • Create guest networks using captive portal with SMS, voucher, or password authentication.
      • Assign VLANs per SSID for network segmentation.
    • Advanced Features:
      • Seamless roaming between access points.
      • Scheduled reboots, client limit per SSID, and SSID hiding.
      • Power On
        • Connect the devices to power using the provided PoE adapters.
        • You can also use 802.3af PoE if supported by your switch (version dependent).
      • Auto-Pairing
        • The two units are pre-configured and will automatically pair with each other when powered on.
        • LEDs on both units help with signal alignment.
      • Mounting and Alignment
        • Use the included mounting kits to install the devices on a wall or pole.
        • Adjust direction for best signal strength using LED indicators.
      • Connection to Network
        • Connect one unit to your main router/network.
        • Connect the second unit to the remote device or switch (e.g., IP camera, remote building).
      • Optional Management
        • You can manage them using the Omada app, web browser, or a centralized Omada Controller.
        • Advanced features such as VLANs, SSIDs, and captive portals can be configured.

    Quick View

    Wishlist

    Compare

    Add to cart

    Omada Wireless Bridge Pair (Pre-Configured) 5 GHz 867 Mbps Indoor/Outdoor Access Points (EAP211-Bridge Kit)

     $139.99
      • Power On
        • Connect the devices to power using the provided PoE adapters.
        • You can also use 802.3af PoE if supported by your switch (version dependent).
      • Auto-Pairing
        • The two units are pre-configured and will automatically pair with each other when powered on.
        • LEDs on both units help with signal alignment.
      • Mounting and Alignment
        • Use the included mounting kits to install the devices on a wall or pole.
        • Adjust direction for best signal strength using LED indicators.
      • Connection to Network
        • Connect one unit to your main router/network.
        • Connect the second unit to the remote device or switch (e.g., IP camera, remote building).
      • Optional Management
        • You can manage them using the Omada app, web browser, or a centralized Omada Controller.
        • Advanced features such as VLANs, SSIDs, and captive portals can be configured.
    • Mounting: Easily mount on ceiling or wall using the included kit. Ideal for indoor enterprise-grade installations.
    • Powering the Device: Powered via 802.3at PoE+ using a compatible PoE switch or injector.
    • Initial Setup:
      • Use Omada SDN Controller for centralized cloud or on-site management.
      • Can also be used in standalone mode via web GUI for quick deployments.
    • Wi-Fi Configuration:
      • Set up dual-band SSIDs with customized security and bandwidth rules.
      • Utilize Wi-Fi 6 features like OFDMA and MU-MIMO to support high client density.
      • Band steering and airtime fairness ensure optimized device performance.
    • Guest Networking & Security:
      • Enable captive portal with flexible authentication (voucher, SMS, password).
      • Use VLAN tagging for traffic segmentation and policy control.
      • Activate WPA3 for enhanced wireless security.
    • Performance Features:
      • Beamforming for stronger connections.
      • Load balancing across multiple APs.
      • Seamless roaming support with fast handoff.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point (EAP660)

     $184.99
    • Mounting: Easily mount on ceiling or wall using the included kit. Ideal for indoor enterprise-grade installations.
    • Powering the Device: Powered via 802.3at PoE+ using a compatible PoE switch or injector.
    • Initial Setup:
      • Use Omada SDN Controller for centralized cloud or on-site management.
      • Can also be used in standalone mode via web GUI for quick deployments.
    • Wi-Fi Configuration:
      • Set up dual-band SSIDs with customized security and bandwidth rules.
      • Utilize Wi-Fi 6 features like OFDMA and MU-MIMO to support high client density.
      • Band steering and airtime fairness ensure optimized device performance.
    • Guest Networking & Security:
      • Enable captive portal with flexible authentication (voucher, SMS, password).
      • Use VLAN tagging for traffic segmentation and policy control.
      • Activate WPA3 for enhanced wireless security.
    • Performance Features:
      • Beamforming for stronger connections.
      • Load balancing across multiple APs.
      • Seamless roaming support with fast handoff.
    • Installation:
      • Mount the CPE210 on a pole or wall using the included hardware.
      • Connect power via the provided 24V passive PoE adapter for long-distance power delivery.
    • Modes Supported:
      • Supports AP, Client, AP Router, Repeater, WISP Client Router modes.
      • Ideal for point-to-point and point-to-multipoint wireless bridges.
    • Antenna & Signal:
      • Built-in high-gain directional antenna designed for long-range transmission.
      • Dual-polarized MIMO improves stability and performance across distances.
    • Configuration Interface:
      • Access via web browser to set SSID, channel, transmit power, security, and more.
      • Use Pharos Control software for centralized management of multiple units.
    • Security Features:
      • Supports WPA/WPA2 encryption, MAC filtering, VLAN, and watchdog rebooting.
      • Network isolation options to protect connected devices.
    • Typical Use Cases:
      • Long-range wireless internet bridging between buildings or towers.
      • Outdoor CCTV network backhaul.
      • Wi-Fi extension to farms, campuses, warehouses, or construction sites.

    Quick View

    Wishlist

    Compare

    Add to cart

    TP-Link Pharos Outdoor Long Range Wireless 2.4GHz Dual-Polarized Directional MIMO Antenna (CPE210)

     $44.99
    • Installation:
      • Mount the CPE210 on a pole or wall using the included hardware.
      • Connect power via the provided 24V passive PoE adapter for long-distance power delivery.
    • Modes Supported:
      • Supports AP, Client, AP Router, Repeater, WISP Client Router modes.
      • Ideal for point-to-point and point-to-multipoint wireless bridges.
    • Antenna & Signal:
      • Built-in high-gain directional antenna designed for long-range transmission.
      • Dual-polarized MIMO improves stability and performance across distances.
    • Configuration Interface:
      • Access via web browser to set SSID, channel, transmit power, security, and more.
      • Use Pharos Control software for centralized management of multiple units.
    • Security Features:
      • Supports WPA/WPA2 encryption, MAC filtering, VLAN, and watchdog rebooting.
      • Network isolation options to protect connected devices.
    • Typical Use Cases:
      • Long-range wireless internet bridging between buildings or towers.
      • Outdoor CCTV network backhaul.
      • Wi-Fi extension to farms, campuses, warehouses, or construction sites.